Acrylic putty and features of use

click fraud protection

Contents

  • 1 About the composition and features of acrylic putties
    • 1.1 A short video about why the acrylic filler
  • 2 was invented How to rationally use acrylic putty
  • 3 What else you should know about acrylic putty
  • 4 About the rules for applying putty work
    • 4.1 How to work with a spatula and carry outputty ceiling and walls. Step by step work.

For the construction works both outside and inside buildings, acrylic putty is used. As already clear from the name of the material, the basis of the putty is acrylic, so the putty has a high plasticity. After applying to the surface to be treated, the acrylic putty forms a very strong layer. It is also used for sealing small damages on the walls.

About the composition and features of acrylic puttying

Acrylic puttying can be used for surface leveling, as well as for finishing the walls before painting. This kind of putty perfectly protects various surfaces from external influences. This material has excellent water resistance and perfectly lays on almost any surface, including concrete and wood.

Film forming material for putty - talcum powder

Film forming material for putty - talc

As a film-forming material for the preparation of acrylic putty, talc is most often used, and to impart color to various whitewash. Acrylic putty can be purchased both in dry form and completely ready for use in closed packaging. It does not shrink, and does not crack after drying.

Which has acrylic putty disadvantages and advantages over gypsum? Perhaps, the shortcomings of acrylic putty can be attributed to the fast drying time after application( as a rule, does not exceed 30 minutes), as well as difficulties in sanding and grinding. But its advantages include:

  • excellent protection of the treated surfaces from external influences;
  • acrylic putty is very elastic. After drying, it forms a sufficiently strong protective coating;
  • dry putty prevents water penetration, however, it has good steam throughput;
  • building material is a clean and absolutely harmless product, besides it is fireproof;
  • is easy to apply to the surface, forming a single solid structure.

A short video about what the acrylic filler

came up with How to rationally use acrylic putty

Acrylic putty based on an aqueous dispersion is used for the treatment of wooden surfaces and concrete products, as it has increased resistance to moisture. The acrylic façade putty used for exterior works has good thermal insulation characteristics, therefore it is used for the treatment of walls and any external surfaces. But acrylic universal putty can be used for interior finishing and other types of work.

It is important to know that for finishing the walls in the rooms water-dispersed acrylic putty for walls is used, and for the ceiling works the putty mixture should be more dense, so choose the acrylic universal filler. At the same time, many people are interested in the question of the consumption of putty for finishing surfaces, because quality filler is not a cheap pleasure.

So, for interior finishing, the average consumption of acrylic putty will be 1.1 ─ 1.2 kg for applying a millimeter layer per 1 m² of the wall. Such a thickness of the applied layer is enough to prepare a wall for painting or gluing the wallpaper.

For outdoor work with façade filler, the consumption will be about 1.5 kg. It should be remembered that this kind of material has a high resistance to moisture, so it can be used for domestic work in very wet areas. To find out how much plastering is needed for repair, the online calculator will help.

Instruments
Widget from SocialMart

What else you need to know about acrylic putty

First of all, acrylic putty is on sale already ready for use and does not require preparation for use. This saves a lot of time, besides it does not require special knowledge to handle the walls and ceiling with your own hands.

It happens that sellers can offer to buy a latex instead of acrylic putty. To determine which shpaklevka better latex or acrylic, you should know some features of fillers with latex base. Note that in composition and many features they are identical. In addition, latex putties are also used for all types of finishing work.

Putties with latex base are also produced ready for use. If necessary, the shpaklevke can be given any shade. Due to the plasticizers contained in the putty, latex mixtures after drying are easily processed and do not crack. There are no other significant differences in these kinds of puttying.

Please note that the surface treatment with acrylic putty is carried out quickly enough. In this case, after drying, all defects are visible on them, therefore, if necessary, you can quickly correct the defects. Slots and defects larger than 5 mm are recommended to be preliminarily closed, since after drying, cracks in these areas may appear. The answer to the question, how to get rid of cracks?
To negative aspects in the work with acrylic putty it is possible to refer complexity in sanding and grinding of surfaces. In addition, dust formed during grinding is harmful to the mucous membrane of the lungs, therefore it is recommended that this kind of work be carried out in a respirator.

About the rules for applying shpaklevochny works

In this article we have considered all the main characteristics inherent in acrylic putty. Putting putty on the surface to be treated is not particularly difficult, so it can be done without problems with their own hands. If there is no idea how to work with a spatula and perform finishing works, then you can watch the training video under the article.

Before puttying, a primer coat is applied to the walls, after drying, you can start finishing.

All the conditions of the temperature regime( indoors and outdoors), which are indicated on the container by the manufacturer, should also be strictly observed.

Next, check to see if all the finishing work for the ceiling and walls has been completed, and also check the insulation of the wiring to avoid injury. Usually begin a finishing finish from the ceiling. After its treatment, proceed to the filling of the walls.

Putting putty on the walls is carried out in several ways. First put the shpaklevku mix. Then take a wide spatula, which will be applied to the wall or ceiling, and small, which need to be applied evenly over the entire length of the finishing place. Putty put on a uniform layer on the desired surface with the help of vertical and circular movements in the horizontal direction.

After drying, the impregnated surfaces should be sanded and sanded. For these purposes, fine-grained abrasive paper is used. The working mixture dries out within a day, and after grinding, the places with defects that will need to be fixed will remain visible. To achieve the ideal state, flaws must be eliminated and then cleaned up.

It is necessary to adhere to the following rule when applying putty on the surface: a layer exceeding 5 mm in thickness will necessarily crack. Therefore, such places are processed in several approaches. It is not recommended to bring the walls to an ideal state with the appearance of bands and waves. This saves time, and besides these flaws are easily removed by grinding.

How to work with a spatula and carry out the puttying of the ceiling and walls. Step by step work.

instagram viewer