How to remove polyurethane foam from clothes

Polyurethane foam is an excellent building material that is applicable to many jobs. But difficulties may arise when it hits the thing or the body. Without preliminary preparation and knowledge of some nuances, it will be difficult to understand the better to clean the place of contamination. You need to decide how to remove the mounting foam from clothing, leather and other items, without harming them.

How to remove liquid foam from hands?

For safety reasons, it is necessary to work with this building material with gloves, but if polyurethane foam is already hit the skin, no need to panic, now you will learn how to clean your hands from this type of pollution quickly and safely. Most importantly, remember that liquid foam should not be spread all over the palm of your hand. It is necessary to carefully collect it to the center of pollution, clean and rinse with plenty of water.

Find out how to remove the mounting foam from your hands in different ways.

• It’s good to have a special spray cleaner with you, especially if it is from the same company as the mounting foam. As much of the product as possible is applied to the contamination, and then washed off under running water. But this method can be applied only in hot pursuit, until the building material had time to dry. If it is already frozen, then aerosol does not help to rectify the situation.
• Acetone is another solution to this problem: the cloth should be soaked in an acetone-containing solvent, rinse off the foam mass, then rinse thoroughly with water.
• You can clean the mounting foam with kerosene by wetting a cotton pad with it and carefully removing the stain.
• In heated oil, soak a cloth and gently remove contamination. This is a very good, effective, and most importantly safe way. It can also be used to wipe away already frozen foam.
• Another great way to get rid of pollution is with the help of salt, which everyone will probably find. To do this, rub the contaminated area with it, and then wash your hands with soap.

We get rid of the frozen foam

If, due to some circumstances, it was not possible to wash off the mass promptly, and it already had time to harden on the skin, in this case it will not work to clean the hands of the mounting foam with funds and solvents. The only way to solve this is to remove dried construction foam mechanically, sequentially following the following recommendations:

1. Hold hands in hot water for about 10 minutes.
2. Lubricate contaminated skin with cream or sunflower oil. So hands will be more protected from damage.
3. It is good to soap a hard brush or pumice.
4. Gently and slowly clean off the already frozen mixture, trying as little as possible to harm the skin near the contamination.
5. Lubricate your hands with a greasy and moisturizing cream.

We remove stains from clothes

If the mounting mass got on the fabric, before throwing away the thing, you should find out how and how to remove the dried foam from the clothes.

• An excellent and effective method is simply to leave the thing in the sun. The bottom line is that under the influence of direct sunlight, the foam changes its structure, and subsequently gradually collapses.
• On sale you can find special cleaners that are designed specifically for such purposes. Using a knife, it is necessary to cut off the frozen mounting foam under the base. Apply solvent for the time indicated on the package, and soak the item in powder for several days, then rinse. Even if traces of contamination remain noticeable, it will be possible to discolor and remove the hardened foam accurately.

Before using cleaners, you need to apply the product on an inconspicuous area of ​​the fabric in order to check whether the composition used will harm it.

• Low temperatures are fatal for this substance: under their influence, the foam changes its structure, becoming very fragile. You need to put the stained thing in a bag and leave it in the freezer for a couple of hours. Then carefully remove the mounting compound with your hands or use a nail file. Wipe off the remains with acetone and wash the item in the washing machine or manually.

• Tools such as gasoline or white spirit can remove dried mounting foam. Of course, these compounds are less effective than special products, but they are more gentle. Using a knife, you must try to eliminate pollution as much as possible, while not damaging the fabric. Then apply a cotton pad soaked in gasoline or white spirit for 15-25 minutes. Then the contaminated area should be wiped with a sponge or a damp cloth and rinse the material under running water, and then wash.

Removing polyurethane foam from objects

There are many ways to help remove the mounting foam from the door, floor and furniture, while maintaining their perfect appearance.

• It is quite simple to remove foam from furniture, the main thing is to track the time when the liquid mass is just beginning to dry. At this moment, it resembles rubber in consistency, then you can gently lift it from one side and successfully eliminate it. Wash remaining traces with soapy water.

• If a wooden door is dirty, then you can carefully remove the mass with a spatula, after which sand the surface and varnish.
• One of the options for eliminating building material is special preparations. Often they cope well with pollution, especially the expensive brand. For fresh and non-serious contaminants, manufacturers offer wet wipes that are saturated with a special tool. With their help, you can easily remove liquid mounting foam from the surface.

"Dimexide" - a drug that perfectly cleanses the mounting foam with laminate flooring. Perhaps this is the best option cleaner. Very budgetary and effective, but you need to work with it carefully and with gloves, since it can cause allergies.

• Removing the mass from the window after it setting using sunflower oil: apply vegetable oil to the place of contamination and leave for half an hour, with the dense side wipe the sponge thoroughly, and when the contamination subsides, rinse with warm water and washing powder.

Useful Tips

And finally, remember some tips that will come in handy when dealing with mounting foam, which is not where you need it.

• Do not rinse the mounting foam with fabric with water, as when interacting with a liquid, polyurethane foam is absorbed even more into the material.

• Human skin has the property of regeneration, so you can not worry if you could not completely wipe the pollution, soon the foam itself will exfoliate.
• In no case should you use alkali and acid based substances to clean your hands. Not only can these products not cope with stains, but there is also a high probability of getting a chemical burn.
• To clean clothes or furniture, be sure to wear gloves.
• Many companies that manufacture polyurethane foam also produce tools for removing it, so it is better to take care of possible spots in advance and add an additional item to the shopping list for repairs.