What are the waterproofing materials?

click fraud protection

Why do I need waterproofing?

Very often there are questions: "What is the use of waterproofing, what is its main function"?The fact is that the newly constructed building can stand for more than a dozen or even a hundred years. And so it would be, but prevent all sorts of harmful phenomena that have an adverse effect on the durability of the structure. First of all, in the waterproofing need a foundation and socle. Because it is primarily important to protect them from rain, ground and meltwater.

Especially dangerous groundwater, which rise during seasonal swelling of the soil, which exerts considerable pressure on the base of the house. As a result, cracks can form.

This subsequently destroys the walls of the building. Also, as a result of the influence of moisture on the ground, fungus and mold can settle. In addition, the waterproofing of walls and ceilings is necessary for the insulation of the structure. This saves considerable money spent on electricity.

And if you talk about the roof, then it can also show a fungus( because of poor or incomplete insulation).This, in general, affects the durability of wooden rafters. And they, as you know, are predisposed to rapid decay. And because soon will have to change the whole roof. The conclusion is that it's easier to take care of all the necessary materials at once and make a quality isolation.

Types of waterproofing materials

The choice of this or that insulation material directly depends on the construction of the building, as well as on the required parameters of temperature, mechanical, moisture resistance. Also an important indicator is the cost. The material can be conditionally divided into the following types: anticorrosion, antifiltration, plastering, painting, backfilling, cast, pasted, mounted waterproofing.

If to speak about anticorrosive, it is intended for protection of a surface from sewage and ground waters and from aggressive structures. By the method of the device is plastering, painting, casting, injection, impregnating, mounted, backfilling. Antifiltration is used to protect underground structures from water penetration( cellars, wells, tunnels, basins, mines, water pipes).Stucco has the appearance of a two-layer coating, which is applied most often to reinforced concrete structures.

Paint, which is created from polymer, bitumen paints and varnishes, is used for metal and reinforced concrete structures. Zasypnaya( for example, asphaltoizol, hydrophobic powders and sands) is used as a loose material( often for formwork or when laying a foundation).

Molding is considered the most reliable and is made of hot asphalt mortars and mastics. It is poured over the formwork on the walls or behind the wall. The glued is created from roll materials. Usually it is covered with concrete, brick walls and ceilings. Mountable: plastic and metal sheets are laid on the ground and other solid bases.

Modern waterproofing materials

It is clear that all materials are selected depending on the conditions and requirements. But the question is - which waterproofing to choose? Or rather, which brands are more preferable and meet the basic standards and quality standards? For this we describe the most popular manufacturers. As already mentioned, they are classified by type into mastics, sheet and roll materials( for example, mineral wool), solutions, polymembrane, film and others.

The mastic is the most popular waterproofing agent Novocote ( suitable for roofs, pools, bridges).It is also possible to use penetration formulations for the walls of GSK-1, DAKO-FOR, XYPEX. If to speak about powder mixes, we will allocate mark LAMPOSILEX .Of roll and sheet materials, the brand FLEXPOL is popular. Well, and how membrane membranes are quite suitable VLDPE, HDPE, FRICTION.

Please note! Before you make this or that purchase, consult with a specialist. Explain for what purposes and tasks you need material. And only after that choose from the entire range offered.

instagram viewer