Maintenance and repair of the toilet installation

click fraud protection

Contents

  • 1 Features of
  • 2 toilet repair repair How to repair the installation system yourself

Modern installation systems from the Swiss company Ceberit are used most often. This is a quality fittings ideally suited for most types of toilet bowls. It rarely fails, and if this happens, the geberit installation is easily repaired without breaking the wall. This is exactly what will be discussed in the article.

Features of repairing the installation of WC

The installation of a suspended toilet has unquestionable advantages over standard tanks: it is the flush mechanisms of high quality, and a large selection of key buttons, and the ability to install the room with any interior. The main advantage is that it can be hidden.

But no matter how good the equipment was, it has the property of failing. What this contributes to and how to repair the installation of the toilet is considered below. So, types of breakages can be very different. We will dwell only on the most common:

  • The tank flows( the reason, most often, in the bottom valve);
  • The tank does not fill up( the cause is the clogging of the filter or the water supply hose);
  • Continuous filling of the tank( the cause is the failure of the gasket or its incorrect installation);
  • Malfunction of the drainage mechanism( cause - in the wrong choice of disinfectant)

Remove all these and other possible malfunctions easily through the drain button hole. That is, to dismantle a partition or break a tile it is not necessary. A specialist repairs the installation of the hanging toilet bowl through the inspection window, because all parts of the system are easily retracted and removed.

How to repair the installation system yourself

As mentioned above, qualitative repairs will be performed only by the master. But you can also get down to work on your own by studying the repair of the tank with the installation of the video, which can be viewed below. It is understandable and simple to talk about how to dismantle the equipment in the installation and flush the Ceberit filling valve.

Operating procedure for dismantling the installation system Ceberit:

Instruments
Widget from SocialMart
  • Step one: removing the flush key. For this, it is necessary to press it from below and, thus, carefully take it out of the cordon, and then remove it from the wall.
  • Step two: removing the frame. First, the screws securing it on the sides are loosened, then the pushers are removed and the frame is removed.
  • Step three: removal of the partition. It is necessary to press the special clamps and remove it.
  • Step four: overlapping the water. Without this, the repair of the geberit installation tank will turn into a flood.
  • Step five: dismantling the filling valve and removing the rocker block.
  • Step six: dismantling the drain valve lock.
  • Step Seven: dismantling the drain valve, which is located inside the tank. Everything, dismantling is completed and it is possible to carry out repair work.

Accordingly, the assembly of the installation after all necessary reconstructions is carried out in the reverse order.

How to flush the Ceberit

inlet valve Installing the installation system, after a while, you can see that the water is pouring through the valve and enters the tank. This is a signal that due to harmful impurities that are in the water, the inlet valve of the system is clogged. In a panic it is not necessary to rush, as all this is easy to fix by yourself, after watching a small video on the topic.

To begin with, remove the valve itself. In principle, it is not necessary to remove it completely. It is enough to unscrew the lid and remove the rubber gasket. Here it should be thoroughly rinsed under a strong stream of water. For reliability, flush the valve cover.

Now we collect everything in the reverse order and see that the fault is eliminated. In such an easy way, you can repair the installation of the suspended toilet bowl yourself.

Repair of fittings in Geberit installation video for installation and assembly

Repair of the tank mechanism of the video

Repair of the flush tank valve video lesson

Video overview of the installation of the Geberit Delta

tank

instagram viewer