Would you like to install a bidet or a hygienic shower yourself, it's possible

If the size of the bathroom does not allow you to install a bidet, then you can find an excellent alternative - a hygienic shower. It is compact, convenient, sterile. What kind of shower for a toilet? Manufacturers produce products of internal and external mounting methods, of course, hidden ones will look more aesthetically pleasing, but will require special hassle with the installation. All the elements of this unit will be hidden in the wall, and therefore it is advisable to connect the hygienic shower in the period when full repair is planned in the toilet.

The equipment consists of:

• small-diameter watering cans;
• hose length of up to two meters.

Installation of a hygienic shower in the toilet is often done directly on the toilet, under the lid or near the sink, if it is nearby. Carrying out the installation of this device, it is necessary to take into account the location and height of the fastening, so that all tenants at home can comfortably use it. Experts advise buying Finnish or German models that stand out in compact sizes, attractive and aesthetic.

Installation of the latent hygienic shower

All the piping comes into the walls, there are models with pulling cord, and there is a hinged. The holder can be fastened near a sink or toilet bowl. Sometimes a hygienic shower is installed in a toilet with a thermostat. For the hidden installation of this unit you will need a connection scheme for the shower. This installation is very demanding and responsible, the more precisely all the rules of mounting the product will be observed, the longer the model will serve its owners. It is necessary to make a project, which will be mounted on the product.

Wall-mounted shower

More unpretentious installation, its mounting does not require special tools, the device set is extensive, consists of:

• hose;
• watering cans;
• mounting plate;
• shower holder;
• scheme of installation of the hygienic shower by own hands .

Widget from SocialMart

Assembly principle

The hose is screwed to the mixer with one end and the other is attached to the sprayer and inserted into the wall holder.

Attention: to prevent the shower from deteriorating, you need to shut off the water after using it, by pressing the special button that is on the product, or mounted separately.

The shower itself is made of stainless steel, plastic watering can, chrome plated, the hose should be with metal inserts, so that in time it does not bend and cause water leakage. The course of the installation work will depend on the features of the purchased products, for the installation of the shower you will need the same tools as for other plumbing jobs.

Mounting a bidet without plumbing

Setting a bidet by one's own hands does not require special skills and professional knowledge. Before starting the installation, it is necessary to choose high-quality equipment, for the small rooms the hanging type is suitable, and for the outboard type - floor. Tools for the job:

• drill with drills;
• adjustable pipe wrench;
• mounting tape for insulation;
• silicone sealant;
• screwdrivers, wrenches.

The bideen connection is started with the instructions for installing the product. Next, a water mixer is assembled, a rubber tube is attached to it. After fixing the hose, go to the mixer connection to the bidet. Sealed gaskets and rubber bands are used, after full centering the device is clamped with a wrench. All joints are treated with sealant, for greater reliability. Installation of the siphon in the bidet is carried out according to the principle of its installation in the sink. Mount the funnel in the bidet hole, the gaskets are fixed with a special ring from the underside of the unit. The lower part of the siphon is connected to the corrugated pipe to the toilet bowl.

Attention: the hose size must be exactly the same as the size of the drain hole

. Further, the bidet is self-transitioning to the final stage. Install the product in the selected location, in order to have enough length of the hoses. Using a drill to make small holes, so as not to damage the tile, you want to turn the punch at low speed. We remove the dust with a vacuum cleaner and insert the plastic dowel into the hole. We fasten the bidet with bolts, it is necessary to fasten the rubber gaskets between the hole and the fasteners in order to avoid the slightest cracks. When the equipment is firmly installed, check the connections to all communications. The siphon bellows is attached to the drain pipe, and the hoses are connected to the water supply system.

The last stage of mounting bidet

We check the operation of the device, the tightness of all connections. If a water leak occurs, all faults must be rectified immediately. That's how to install a bidet and toilet. Let such compact and comfortable hygiene items serve you for a long time, and please your functional capabilities.