How to choose the interior door correctly

Instructions for choosing interior doors

Probably, it's no secret that the interior door is one of the most important elements of the interior. It is the interior doors that must combine the two very important indicators - perfect design and quality. And it is very important to understand that the use of exclusive quality glass guarantees your door the perfect look and uniqueness, and this is an important factor in the formation of an individual design of your home. In order to choose this particular door, you should familiarize yourself with the simple instruction for choosing the interior door. Spending about ten minutes, you can make the right choice in favor of a good door.

The main criteria in choosing a quality interior door are:

1. It is very important that the interior door is made of natural, clean and ecological materials. In this case, be sure that you have a good door. It can be materials of solid wood or natural veneer. Equally important is the fact that the door is covered with expensive, high-quality and harmless to health varnish.

2. Be sure to pay close attention to the condition of the surface of the door. Remember that the surface of a good interior door should be smooth and without any jags or flaws. Check the door to the touch - you should feel a pleasant and warm feeling. Again, it is worth paying attention to the lacquer that the door is covered with - it must be expensive and environmentally friendly. Do not pay attention to the tricks of the seller, because a good and high-quality varnish will last a very long time, and even after ten years, he will not lose its excellent form and properties. In addition, high-quality varnish will ensure the strength and protection of your door. The quality of the varnish can be checked in a very simple way - for this press the nail on the door. Remember that high-quality coating will not leave a trace from your nail, but cheap and simple varnishes always reflect traces. It is very important that the nail is not included in the wood. You should also know that lacquer is one of the most expensive materials in the manufacture of doors. And often many manufacturers save on this material. Sometimes unscrupulous manufacturers use so bad a varnish that it can be harmful to your health. And to determine this type of lacquer is very easy - it always leaves traces and fingerprints from your fingers. So you should take this into account when you do not know which one to choose the interior door.

3. When choosing a quality door, you should also pay attention to its painting and color. Remember that the color of a good door should be uniform, clean and deep. And in no case are the presence of specks and spots. But, no matter how the door was painted, it must necessarily display a natural structure. It happens that some manufacturers in order to save hide the defects and unevenness of the door with the help of toning, thereby they give it a dirty color and deprive the natural and natural beauty - such a door, for sure, it is not worth taking.

4. It is very important that the door does not have unnecessary gaps and overlaps in the areas of connection of the baguette, gratings and frames. These places must be exactly matched.

5. One of the main factors is the geometry of the door. Remember that the door should be perfectly flat, the maximum discrepancy that can meet should be up to one millimeter - no more.

6. It is worth remembering that a cheap glass will never be used on a quality door. In such doors there will always be only expensive and high-quality glazing, which will also have high-quality fasteners - silicone sealants and seals.

7. Do not miss that moment, that the box should be with a sealant without fail.

8. And do not forget to pay attention to the fact that the finish of the door leaf, casing and box should be the same in quality and color.

If you did everything correctly and could prevent you from getting into your hands the doors with flaws, then rest assured that you have chosen a quality door. It is very important to consider all of the above points, if you want to choose the right door. And then you definitely will not go wrong. In order for you to distinguish a quality door from a low-quality one, you can study one more small instruction that will also help you when choosing the interior door for your home.

Widget from SocialMart

The first point is to check the coating and varnishing of the exterior surfaces of the door.

1. If you notice. That the color of the door is not even, there are spots and incomprehensible turbidity, as well as the paint is not uniform and dirty - be sure that the manufacturer wants to mislead you, because it uses toning to hide defects, gaps and surface roughness. Obviously, such a door belongs to a class of substandard.

2. A poor-quality door can immediately give itself a porous surface, lack of smoothness and the presence of small bumps. May also meet specks, hairs and litter under the paint, black dots and all kinds of garbage. If you are not convinced, then swipe your arm around the door - for sure the impressions will not be the best.

3. With a little effort, swipe your finger on the door. If there is a trace on the varnish or if the varnish has split off completely, be sure that before you is a door with a poor-quality coating, and maybe even very dangerous for your health. In no case can such a door be purchased.

4. If the door ends differ in color, or by some other indicator - this is a poor-quality door.

If you found all of the above factors when choosing a door, then you should make only one conclusion - in any case not to buy such a door. All that you can get in the future from such a door is a detachment of varnish and paint, not an ideal kind of your interior, and even worse - it can affect your health those chemicals and substances that can stand out from poor-quality door cover. The second item is the measurement.

If you decide to go for the purchase of the interior door, then do not forget to bring your roulette. The thing is that in order to understand in what conditions this door was made, it is worthwhile to perform very simple and simple actions:

1. Diagonally measure the distance from one corner to the other. Now compare the results. Remember that a high-quality door will have a difference from 0 to 1 millimeter, but at a poor-quality door such indicators can be up to 10 millimeters. And this means only that the door was made "on your knees", therefore, it is not worth taking such a door.

2. From the end face, look carefully at the door leaf. Very often you can see that the doors of many manufacturers are very visible "eight".And this means only that this wood is not properly dried. But the whole point is that such an eight will only increase with the years, so it is worthwhile to think about whether it is necessary to take such a door, or it is better to choose another interior door.

It is worth remembering that only high-tech factories can produce quality doors that meet all world standards.

Point three - check the surface.

It is very important that the door surface is perfectly smooth. In order to check, you need to hold your hand over the surface - you should feel a pleasant sensation. Neither any gaps and roughness should not be. Also pay attention to the upper ends. Very often they are roughly cut or rough. Point four - check the glass.

1. Slightly shake the door, if you hear a rattling, then it follows that the glass is loose, and this can not speak about the quality of the door.

2. Pay attention to the state of frosted glass. If you notice thick or cloudy spots, then you should know that they can not be taken out anything, as these stains are removed on special equipment after the door treatment.

3. It is worth paying attention to the origin of the glass - it should not be cheap.

4. Be sure to find out which sealant is used to insert and fasten the glass.

The fifth point - check of a baguette and connections of designs.

When choosing a door, be sure to carefully inspect all the connections of the structure and in particular the baguette of the door. Remember that there should not be any unevennesses, gaps, overlaps, cracks and, most importantly, in no case should there be uneven contiguity of the details.

And in conclusion I would like to say that when choosing a interior door, it is also worth asking - what material is the door made of? You yourself must understand that a high-quality door will never be made from a cheap chipboard. Following the helpful advice from our site about repairing the apartment, you will always know how and what to choose the interior door correctly and safely. Good Luck.