Manufacture of upholstered furniture by own hands

Undoubtedly, many faced the need to repair soft furniture or replace it with a new one. A rich assortment of stores allows you to choose whatever you want. But, at the same time, the prices for high-quality furniture products make one wonder how hard it is to make upholstered furniture with their own hands and what time will be spent on this process. It turns out that nothing is impossible and make a sofa or an armchair, although difficult, but quite possible. Moreover, this has undoubted advantages. Firstly, such furniture is 100% original. It will become a matter of pride. Secondly, it will be much cheaper than buying in a store, and not always there you can find exactly what you want to see in your apartment.

General plan of actions of

1. Choice of furniture that is needed by

So it turns out that the manufacture of upholstered furniture by their own hands is much more practical and profitable. Having made the decision to do it yourself, do not be afraid of difficulties, but they will necessarily arise, make an action plan. First of all, decide exactly what you want, what functionality your furniture should have. This is necessary, since it is on this that the choice of material that will be used depends. The next step is also extremely important: the development of drawings. You have the skills - do it yourself, do not know - look on the Internet. Quality soft furniture with their own hands, the drawings of which are necessary, it will only work if the dimensions are respected.

2. Working with individual parts of

Naturally, you need to start the work with the creation of a skeleton. Then separate elements are prepared, the connections of which will be discussed a little later. Here, drawings with exact dimensions will be useful. The marking of individual parts is applied to the material, it is carefully and carefully checked and only then you can start cutting the workpieces. If everything is done correctly, in accordance with the drawings, the first fitting should show how clearly the parts fit together. In case of discrepancies, mistakes must be corrected immediately, adjusting the elements of upholstered furniture to full compliance.

3. Determine the connection type of

parts The choice of connection type will depend on the purpose and functionality of the furniture. If you make upholstered furniture with your own hands for permanent use in one condition, you need to join the parts using nails, screws, screws or glue. If the furniture is planned to be disassembled or laid out, it is necessary to use the so-called lapkovy method of fastening. In any case, the work must be carried out carefully, excluding the possibility of bulging nails, spots from the glue. At the same stage it is necessary to process all sharp corners so that they do not show through the upholstery and do not bring any discomfort in the future.

Widget from SocialMart

Tip: consider the option of attracting additional hands when connecting parts. This alone is problematic. When using glue, calculate the time of its full drying and only then work further.

4. Choice and creation of furniture upholstery

At the final stage, soft furniture created by own hands, it is required to sew, to make the corresponding name, that is soft. Most often use foam rubber, medium thickness. Cover the furniture can be any fabric, to your taste. The material should be cut according to pre-made blanks and fastened to the product with the help of staples. And do it so that they were not visible to others.
Well, perhaps, with general recommendations, we figured out, and now let's try to make upholstered furniture with our own hands.

Folding sofa bed: step by step creation of

So, let's consider the question of how to create your own hands a popular and multifunctional sofa bed. In our product, we will use the transformation a bit unusual method: the seat on the guide bars is pushed forward until it stops, and the back of the sofa is placed in a horizontal position by turning 90 degrees.
We start from the bottom. To create it, we take boards measuring 15x5 cm. Using self-tapping screws and a screwdriver, we collect a base from them, the dimensions of which will be 190x65 cm. The bottom is made from a sheet of fiberboard, fixing it from two sides with the help of racks. To the fact that we managed to attach legs. On the same principle, we make a backrest and a seat, stuffing the fiberboard from two sides. In the interior of the seat, the blocks are created, creating additional reinforcement.

Tip: when creating a sofa back, consider that it is in an upright position, its soft part facing outwards. Pillows made of polyurethane foam wrapped in holofayder will help to give great softness and aesthetics.

The last, but the most important, stage is how to make upholstered furniture yourself, this is the creation of a transformation mechanism. The back is connected to the base with the help of the most common loops, screwed with screws. In the places of twisting, you can fix additional bars, which will only improve the quality and reliability. Create side walls from fiberboard or not, this is the decision of each individual owner.

Well, in this way, in a fairly simple way, you can get a soft furniture photo of which you see in front of you.

And fully understand how to make soft furniture with your own hands the video will help, which you can see below.