How to split stones: the secrets of professionals

click fraud protection

1 Solution: break with sledge hammer and chisel

For this method you need: a sledge hammer, chisel, hammer, gloves and face protection, such as a mask.

Work wizard with a hammer

We break a cobblestone with a sledgehammer

The entire work process consists of several simple ones:

  1. Dig a small hole in the ground and place your stone in it. This is necessary primarily for defensive purposes, as it will help to protect against ricochet during the impact.
  2. Prepare a sledge hammer and hit the center of the stone as far as possible.
  3. The kick must be clear and strong and strong. To achieve this, an additional handle attached to the main handle should be used.
  4. Do not expect the first blow to be effective! Most likely, you will have to hit a few more times, but always in the same place.
  5. If the lump is not broken, you should turn it to the other side and repeat the action.
  6. Once the splitting has occurred, you should maximize the surface of the fragments with a hammer.

Split with a hammer

Split with a sledge hammer

We break the stone by hand with the chisel

Nuances! If you do not keep a sledgehammer at home and you can not get it, you can use a chisel or a conventional heavy hammer with a short handle. Concerning the chisel, it is desirable that it be with a tip of carbide metal, because it must withstand the impact on a very strong stone.

Tips for the correct split of wild stone with your own hands:

  1. Cobblestone, especially large, is placed in a pit of land.
  2. Chisel attach to the stone, and apply a hammer translating strokes, moving the chisel as the cobblestone begins to drip.
  3. The wild cobble begins to crack at least 10 strokes.
  4. Never forget the safety rules. Their observance is allowed to save their arms and legs. Use mittens( for example, tarpaulins or building leggings), and large boots are desirable on the feet. For face safety, wear a welding mask.
  5. The most important thing! Make sure that you do not have any of your pets( relatives and animals) near you and did not suffer from splinters or bounce.

Using a chisel

2 Solution: cut using the home and electric tool

In order to break the stones are required: wedges of different sizes and lengths, a sledge hammer, a hammer, iron strips. Looking at it, a large or small cobblestone, its hardness and breed determine the size of the wedges. Then you need a Bulgarian with a diamond disc.

Stone splitting is as follows:

  1. On the stone, break through a horizontal opening a few cm when using a long handle handle and a blade( chisel).
  2. Then put several iron strips in the exposed section so that wedges can be spaced 10 cm apart between them.
  3. You need to hit the wedges until the stone block is split into separate slabs.

Pay attention to the video. Master during the experiment shows how you can break a cobblestone with wedges.

Important! Using a sledgehammer, remember that its strength lies not in how far you swing, but in how to properly hold the handle. Therefore, place hands at the end of the handle, since at this blow the force splitting the cobblestone is several times greater than if you held the handle directly at the metal base itself( gibbet).

The second variant of stone splitting is more complicated, but the result you will certainly enjoy, as the pieces will be more even and require less processing and polishing. With the help of a sledgehammer, the pieces are uneven and often clumsy.

3 Solution: cut stone with dynamite

This advice is applicable in the field, because it requires remote location from settlements, as well as permits. But if you still can not use the mechanical tools, and you decide on the last resort, MaxDinamit Cement can help you.

This tool is not quite a classic dynamite, but is able to completely replace explosives.

It is used by this instruction:

  1. A small saw cut in a stone is cut with a chainsaw.
  2. Then in the middle part another propyl is performed just slightly wider.
  3. Hammers are inserted into the cuts, but metal wedges are also possible.
  4. The holes are filled with the maxyndite. Destruction is due to the fact that the material begins to increase in volume and leads to the splitting of the stone( it is subject to both granite and limestone).Expands with increasing temperature and heating up to 90% of the initial state.
  5. Expect. After a while, notice that the stone will start to crack.
  6. Cement, in turn, after performing its basic function becomes loose, like sand.

Effectiveness of field materynamite

On this all, now you have been told all the secrets of the splitting of stone blocks, and it remains to wish good luck and patience! Take care of security measures!

instagram viewer