There are several types of this enamel, but we are most interested in the so-called acrylic universal enamel .It is sold in any store at a small price. Also there is polyurethane and alkyd enamel for metal. All these options are also good. Their difference from acrylic paint is price and less versatility.
Alkyd and polyurethane enamels are used in a narrower range, mainly to counter certain negative factors, for example, high temperatures or corrosion. Because of very complex chemical formulas and a huge set of components, their price is higher. There was also an opinion that because of the large amount of chemistry they are dangerous for living organisms. This is not so, but on their background, the acrylic enamel looks much more attractive. That is why our choice was based on it.
The positive features of this material include the protection of your parts from
When viewed from the design side, the enamels are offered in several color solutions, so that everyone will find something suitable for themselves. Well and at last, they perfectly withstand our severe weather conditions. Among the minuses can be called only the preparatory work, which must be done before the coating.
For proper application of enamel on metal, it must be prepared. These activities include ripping off the old paint layer. This is done with a knife, grinding paper and solvent. Use the method that best suits your situation.
If the metal is rusty, then all the rust has to be removed. This is done with a screwdriver, a grinder and a grinding stone, or a simple hammer. Again, it all depends on the amount of rust and the availability of the right tool.
After rust removal, depressions and irregularities are obtained. In this case, before using the enamel, the primer over the metal should equalize all these imperfections.
It is time to apply enamel, for this you will need a brush and a roller. The first thing to do is to dilute the paint material, if it so requires. Do this exactly as instructed. If you have already bought the finished enamel, then it should be steeply mixed using a stick or a metal pipe. This is done to avoid lumps and other unpleasant surprises.
Now we pick up the roller, dunk it in the enamel and apply it on the surface carefully and evenly. This is done from the top down, in the reverse order you will not succeed, because from above everything will start to drain. Joints of sheets of metal, seams and other difficult places should be covered with a brush.
After an hour, everything will dry up, and it's time to proceed to the second stage of coating with metal enamel, that is, repeat the above actions using the same roller and brush.
After drying, your iron is completely ready for all sorts of tests. Do not pay for what you can do with your own hands. A few hours of your time save your money, which helps improve the family budget.