Wall panels for the corridor: finishes

click fraud protection

If the theater starts with a hanger, then the apartment starts with the hallway, because it is by its design that guests add the first impression of the entire dwelling. Unfortunately, even the best repair loses its attractiveness over time and requires updating. If this is the moment, and you are thinking about the question of renewing the interior of the hallway, pay attention to the new finishing material - wall panels for the corridor. The peculiarities of such panels, their types and methods of decoration today, "House of Dreams" will share with its readers.

wall panels for the corridor

Wall panels for the

corridor Variety of

wall panels Wall panel manufacturers have taken care to satisfy the tastes of their customers. This finishing material is available in various textures, design solutions, sizes and colors. Depending on the technical properties and characteristics, the wall panels are classified into several sub-types:

  • tiled panels

These panels resemble standard ceramic tiles in form, but on the reverse side there is a "spike-groove" binding system. Panels of this type can be used as a single material for decorating walls in the corridor, or you can combine them with other finishes, creating an interesting design composition. Tiled panels are available in different colors and are often decorated with additional trim.

wall panels in the corridor

Wall panels in the corridor

  • Rack panels

The appearance of this material resembles a "lining".On the back of the panels there is also a system of "spike-groove", which greatly facilitates the process of their installation. As a rule, the height of the rack panels is from 2.5 to 6 meters, and the width of products can vary from 10-40 cm.

wall panels for corridor

Wall panels for corridor photo

  • sheet panels

Panels of this type are monolithic homogeneous sheets that can additionally be decorated with patterns and patterns. This finishing material is ideal for decorating non-standard sized walls. In addition, the distinctive feature of the panels is that with a flat wall they can be mounted without the use of additional tools.

wall panels for the corridor

Wall panels for the corridor

Rules for the selection of wall panels for the corridor

The main criterion with which you should familiarize yourself with the choice of wall panels are the properties and features of their materials. Modern wall panels are most often made of MDF, plastic, natural wood, chipboard, fiberboard, cork, mineral wool and polystyrene with mirror filling.

You can use any kind of panel to decorate the corridor, however pay attention that if the front side of the finish is additionally covered with a layer of wax or laminate , then they belong to the class of moisture-resistant finishing materials. Since there is rarely a high humidity in the corridors, there is no need to show special requirements for their moisture resistance.

Each material used for the production of panels is distinguished not only by its design, but also by its technical characteristics.

MDF

For example, MDF panels are highly durable. This material can improve the sound and heat insulation properties of the room. However, when choosing MDF panels for finishing the corridor, note that if they are operated in high temperature conditions, the material can expand, losing its attractive appearance.

Corridor finish with wall panels

Finishing the corridor with

wall panels

plastic The plastic panels also improve the sound insulation of the room. The finishing of this material is attractive for its design variety: they can be glossy, matte or cellular. In addition, they are often applied to drawings and patterns. Plastic panels in the corridor are also good because they are very easy to take care of. Since the material is not afraid of moisture, it is easy enough to clean it from dirt. The only drawback of the plastic panels is that they are completely non-natural material.

Plastic panels in the corridor photo

Plastic panels in the corridor photo

Wood

Wood panels, perhaps, are leaders in the list of the most attractive finishing materials. Wall panels made of natural wood ennoble the interior of the corridor, giving it a solid and rich appearance. However, this material requires some design unity, besides, natural wood is distinguished by its high cost.

Wooden wall panels for corridor

Wooden wall panels for corridor

panels in the hallway photo

Panels in corridor photo

Particleboard and chipboard

Panels from chipboard and fiberboard, on the contrary, are attractive at their democratic price. This material is ideal when you need the most simple and unobtrusive design. However, please note that the materials of chipboard and fiberboard are not distinguished by their strength.

wall panels for the corridor

Wall panels for the

corridor.

plug. The plug panels have all the characteristics necessary for comfortable operation. This material is durable, natural, lightweight, it increases the heat and sound insulation of the room. In addition, the wall panels of cork are stylish design. Their honeycomb structure is able to decorate any interior, especially the hallway or corridor.

Cork panels for walls in the hallway photo

Cork wall panels in the corridor photo

Finishing the corridor with wall panels of cork

Corridor decoration with

cork wall panels Mineral wool

Mineral wool panels are generally used in those rooms where certain acoustic conditions need to be created either from the outside of the building( sandwich panels).However, if this material is treated with an additional coating, it can be used in the design of the walls of a common hallway.

Mineral wool for filling wall panels

Mineral wool for filling wall panels

Panels from mineral wool for external walls

Mineral wool panels for exterior walls

Mirror polystyrene

Mirror polystyrene panels are attractive for their design. To produce them, a film simulating a mirror coating is used. Typically, this type of panel is better to use as an additional finishing material. In addition, polystyrene has good flexibility. Wall panels made of it, are ideal for decoration of walls of non-standard shapes, niches, ledges, columns, etc.

Mirrored wall panels in the hallway photo

Mirrored wall panels in the corridor photo

Mirror polystyrene panels

Mirror panels from polystyrene

How wall panels are mounted

Wall panels can be mounted in two ways: with glue or with an additional crate. The glue can only be used if the walls in the corridor do not need to be leveled. If it is necessary to decorate the unevenness of the walls, the panels should be mounted on the crate. In this case, if you want to reuse panels in another room, mount them not only on the crate, but also on wooden or plastic clamps.

Wall panels for the corridor allow you to radically change the interior of the room with a relatively easy installation process. And the good properties of this finishing material provide a comfortable and durable operation.


How to make more your little hallway
Creating a workstation in the hallway
An entrance hall that does not have
The hallway furniture is modern, comfortable and practical
The design of the corridor in the apartment: the secrets of the successful design of the

instagram viewer